Home > Products >>Sensors >> Fiber Photoelectric Sensor >> Fiber Sensor FG-10

Product Detail

Fiber Sensor FG-10

Light source
           Red light source                     Green light source
Model

         FG-10N     FG-10P                        FG-10NG    FG-10PG                 

         FG-10NH   FG-10PH                   FG-10NG    FG-10PG           

Detection output

NPN open-circuit collector transistor
Maximum inflow current: 100mA
External voltage below 30V (at detection output and 0V)
Residual voltage: below 1.0V (when inflow current is 50mA)
Less than 0.4V (current 16 mA)


PNP output type
PNP open-circuit collector transistor
Maximum inflow current: 100mA
External voltage below 30V (at detection output and +V)
Residual voltage: below 2.0V (when inflow current is 50mA)
Less than 1.0V (current 16 mA)

Operation output
ON at detection or non-detection, can be set by keystrokes
Self diagnosis
Output ON during unstable detection lasts for 40 ms, and output is cut off automatically
when short circuit is output, and protection signal lasts until short circuit is removed.
Reaction time
Common type: switching frequency 1KHz, reaction time 500us .
High-speed: switching frequency 3.5KHz, reaction time 150us .
Detection distance

Red light source: diffuse reflection detection distance: 200 mm (diameter 1 mm core)
counter-fire detection distance: 1200 mm (diameter 1 mm core)

Green light source: diffuse reflection detection distance: 70 mm (diameter 1 mm core)
counter-fire detection distance: 400 mm (diameter 1 mm core)

Delay function
40 ms fixed OFF delay timing

Ambient temperature
-10℃~50℃(No dew or frost ) storage :-20℃~70℃
Ambient humidity
35-85% RH, storage: 35-85% RH
Remarks It have analog output model




Resources Download

  • No Resources.